Owner's manual

6 Devices

IC Net 2.0

Ctrl "control

command"

Set the specified remote output

signal. In addition to the normal

control commands (details see 766

Instruction for Use) special

commands defined on the Configu-

ration tab can be used.

Wait 1...9999 s Waiting time.

StartDA Start data acquisition.

Configuration

The Configuration tab of the 766 IC Sample Processor window con-

tains parameters settings on the five subtabs Rack, Beaker posi-

tions, Needle positions, Control, and Scan.

Rack

Rack definitions

Code Binary ID code for rack identification (read-

only).

Type Predefined rack type (read-only).

Settings

Maximum lift way Definition of lowest lift position possible in

mm.

Entry range: 0...125 mm

<Apply> Send parameters to 766 IC Sample Proc-

essor.

<Ask> Read current parameters from 766 IC

Sample Processor.