User guide

4.8 Connecting the drainage tubing and leak sensor
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
72
￭￭￭￭￭￭￭￭
920 Absorber Module
Route the loose end into a waste container.
4.8.2 Connecting the leak sensor
Plugging in the leak sensor connection cable
The leak sensor connection cable is coiled up in the base tray.
1
Pull the leak sensor connection cable out of the base tray as far as
needed.
2
Plug the plug for the leak sensor connection cable into the leak sen-
sor connection socket (labeled Leak Sensor).