User guide

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Installation
920 Absorber Module
￭￭￭￭￭￭￭￭
63
Port … … is used for … … is connected to
5 Inlet for transfer water Metrosep I Trap 1 – 100/4.0 (6.1014.200)
6 Sample loop 6-port valve – Port 3
Accessories
Port Install this accessory
1
￭ PEEK capillary, 0.5 mm ID / 15 cm (6.1831.040) (17-1)
￭ Pressure screw (6.2744.010)
2
￭ PTFE capillary, 0.75 mm ID / 3 m (6.1803.160) (17-1)
￭ Pressure screw (6.2744.010)
3 ￭ Sample loop 250 µL (6.1825.290)
￭ Pressure screw (6.2744.010)
4
￭ PTFE capillary, 0.5 mm ID / 3 m (6.1803.030) (17-18)
￭ Pressure screw (6.2744.010)
5 ￭ PTFE capillary, 0.5 mm ID / 3 m (6.1803.030), approx. 40 cm
(17-17)
￭ Pressure screw (6.2744.010)
6 ￭ Sample loop 250 µL (6.1825.290)
￭ Pressure screw (6.2744.010)