User guide

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Installation
920 Absorber Module
￭￭￭￭￭￭￭￭
45
Connecting port 1
1
Mounting the FEP tubing
Port 1
6.1532.130
Tighten the FEP tubing on port 1 of the dosing unit.
Connecting port 3
1
Mounting the coupling
6.2744.080
6.2744.350
6.1803.030
￭ Push the pressure screw over the end of the PTFE capillary far
enough that a few millimeters of the capillary extend beyond the
tip of the pressure screw.
￭ Attach the coupling on the pressure screw and tighten it by hand.