User guide

4.4 Dosino for the absorber solution
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
44
￭￭￭￭￭￭￭￭
920 Absorber Module
FEP tubing (6.1838.020) is threaded in through the thread adapter
(6.1618.020) and the Dosino holder (6.2057.230) and is connected to
port 2.
1
Tighten the Dosino holder (6.2057.230) with the thread adapter
(6.1618.020) on the bottom of the dosing unit.
Next step Connect the ports 1 and 3.
Connecting port 1 and port 3
Accessories
The following accessories have to be connected to these two ports:
Port Install this accessory
Port 1
FEP tubing M6 for 920, 9 cm (6.1805.040) (10-12)
Port 3
￭ PTFE capillary (6.1803.030), approx. 20 cm (10-10)
￭ Pressure screw (6.2744.350)
￭ Coupling (6.2744.080)