Owner's manual

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭

3 Assembly

872 Extension Module IC Pump

￭￭￭￭￭￭￭￭

Inserting the detector(s) again and connecting it (them)

See manual for the IC instrument.

Restoring the loosened connections

￭ Reconnect the drainage tubings,

Possibly, a longer section of silicone tubing 6.186.020 must be

cut to fit and mounted (see also the manual for the IC instru-

ment).

￭ Connect the leak sensor (see manual for the IC instrument),

￭ Connect the USB cable,

￭ Connect the MSB cable,

￭ Plug in the mains cable.

3.4 Setting up the extension module next to the IC

instrument

Switching off the IC instrument

Switch the IC instrument off and disconnect the mains cable.

Mounting the base tray

￭ Tilt the extension module sideways and lay it down flat.

￭ Attach base tray.

￭ Tighten the washers and the cylinder screws (8-2) with a 3 mm

hexagon key (6.2621.100).