Instruction Manual

2.2 Rear panel
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
12
￭￭￭￭￭￭￭￭
814 USB Sample Processor
2.2 Rear panel
USB 2
USB 1
Contr.
MSB 1
MSB 2
MSB 3
Made by Metrohm
Herisau Switzerland
P: 115W U: 100 - 240 V f: 50 - 60 Hz
WARNING - Fire Hazard -
For continued protection replace only
with the same type and rating of fuse
Nr.
1 2 3 4 5
Figure 4 Connector strip
1
USB connectors
2
Controller connector
For the connection to the PC or Touch Con-
trol.
3
MSB connector
For stirrers, dosing devices, Remote Box.
4
Mains connection
5
Type plate
Contains specifications concerning mains
voltage and serial number.
2.3 Sample racks
A sample rack is a turntable that acts as a receptacle for sample vessels.
Various types of sample racks are available for different numbers and
types of sample vessels.
The 814 USB Sample Processor requires sample racks with up to a maxi-
mum of 42 cm diameter.
Figure 5 6.2041.470 Sample rack
Other user-defined racks can be supplied upon request and the required
rack data can be loaded and configured in the control software. Any
arrangement of rack positions is possible.