Owner's manual

2 Installation

797 VA Computrace / Hardware-Manual 8.797.8001EN

2 Set automation parameters

• Select the Automation tab.

• Select „813/863 Compact Autosampler“ for the field Sample processor in

the Sample handling-part of the

Automation tab.

• Check the checkbox

Relay box.

• Normally, the default settings can be used for samples with 10 mL volume:

3 Test automation parameters

• Fill two sample vessels with water and place them in position 1 and 2 on

the sample rack of the 863 Compact Autosampler.

• Click on

797 VA COMPUTRACE / Settings / General settings and select the Auto-

mation

tab.

• Click on

, check the automation parameters and modify them if

needed.

2.9.4 Operation of the 863 Compact Autosampler

After installation of the instruments according to sections 2.9.1...2.9.3 sample series

using the 863 Compact Autosampler can be started. Proceed always in the following

sequence:

1 Switch on instruments

• Switch on PC.

• Switch on 797 VA Computrace Stand.

• Switch on 863 Compact Autosampler and 843 Pump Station.