Owner's manual

2 Installation

797 VA Computrace / Hardware-Manual 8.797.8001EN

• Note: The maximum allowed dose rate is 2 mL/min if the 4-way microtip is

used to dose the solution in the measuring vessel.

• Click <OK>.

• Click on

or MAIN WINDOW / Utility / Dosino control to open the DOSINO

CONTROL

window.

• The connected Dosino and the mounted Dosing unit are automatically iden-

tified.

• Click the

button to empty and refill the Dosing unit installed on

the Dosino.

• Check if there are air bubbles left in the glass cylinder of the Dosing unit. If

this is the case, repeat the flushing procedure by clicking the

button.

• Close the

DOSINO CONTROL window.

• Note: If you choose Port 3 for menu item

Prep / Empty via port, you must

install an FEP Tubing Connection 6.1805.XXX from Port 3 to a waste con-

tainer.

685 Dosimat and 805 Dosimat

1 Mount Exchange unit on Dosimat

• Procedure, see Instructions for Use 685, section 2.1; and Instructions for

Use 805, section 3.1 respectively.