Owner's manual

2.7 Stirrer
797 VA Computrace / Hardware-Manual 8.797.8001EN
39
Fig. 14: Construction of the auxiliary electrode
2.7 Stirrer
The startup procedure for the stirrer is as follows:
1 Insert stirrer
• Insert complete stirrer in opening 63 of the measuring head 24 as far as it
will go (see
Fig. 6).
2 Connect stirrer
• Stretch drive belt 32 between drive wheel 35 and drive shaft of the stirrer
28 (see Fig. 3).
43 Auxiliary electrode
111
Electrical connection for
cable "AE"
112
Pt Auxiliary electrode
(6.0343.000)
113
Pt tip
(permanently attached)
114
Electrode holder
(6.1241.020)
115
Locking ring
116
Glassy carbon tip
(6.1247.000)
115
116
111
114
112
113
111
43