Owner's manual

4 Appendix
797 VA Computrace / Hardware-Manual 8.797.8001EN
110
Quant. Order No. Description
1 6.5323.010 Rinsing equipment for 797 VA Computrace
incl. the following accessories:
1 × 6.1446.040 Dummy stopper M6
1 × 6.1456.210 Measuring vessel for sample changer
operation
2 × 6.1602.105 Siphon GL45
2 × 6.1618.050 Thread adapter 40 mm/GL45
2 × 6.1621.000 PE container, V = 10 L
1 × 6.1805.020 FEP tubing, L = 52 cm
1 × 6.1805.100 FEP tubing, L = 40 cm
1 × 6.1805.180 FEP tubing, L = 16 cm
4 × 6.1805.530 FEP tubing, L = 200 cm
1 × 6.1808.000 Coupling bush, with 2 threads M6
2 × 6.1819.010 PTFE tube, L = 86 mm
1 × 6.1819.020 FEP tube, L = 250 cm
4 × 6.1820.020 Screw connector
1 × 6.1828.020 Tubing connection to container
1 × 6.1829.020 FEP aspiration tubing, L = 500 cm
1 6.2141.230 Remote cable Compact Sample Changer/Compact Autosampler -
Titrino plus/Pump Station (standard)
1 6.2141.180 Connecting cable 797–863–731 (alternative)
Cable 797 VA Computrace - 838 Advanced VA Sample Processor - 731
Relay Box
1 6.9921.221 Adapter cable 863 - 6.2141.180 (alternative)
4.3.7 Automation for electroplating bath analysis
It is recommended to use the 838 Advanced Sample Processor for automated elect-
roplating bath analysis. For automated addition of auxiliary solutions, see section
4.3.5.
Option 838 Advanced Sample Processor:
Quant. Order No. Description
1 2.838.0310 838 Advanced Sample Processor for VA
Instrument with accessories
1 2.843.0040 843 VA Membrane Pump Station (standard)
1 2.731.0010 731 Relay Box (with 772, alternative to 843)
Control unit for the two 772 Pump Units
2 2.823.0010 823 Membrane Pump Units (with 731, alternative to 843)
Pumps to rinse the measuring vessel at the 797
3 6.1805.530 FEP tubing
L = 200 cm
1 6.1819.010 PTFE tube
L = 86 mm