Instruction Manual

4 Exploratory mode

797 VA Computrace – Software

For the running voltage sweep there is a live dis-

play in the EXPLORATORY CURVES window with

automatic scaling of the axes. Manual rescaling

can be done by pressing the <F4> button.

The red light at the left side of the <Stop> button

indicates a current overload. In this case, stop the

measurement and change the measurement pa-

rameters.

In the second line of the status window comments

or error messages concerning the running meas-

urement are displayed.

A running measurement can be stopped, interrup-

ted and continued. Each step in the operation se-

quence can be abbreviated by clicking the <Next>

button.

Stop measurement

Stop running measurement immediately.

Hold measurement

Interrupt running measurement.

Continue measurement

Continue an interrupted measurement.

Next step

Go to next step in operation sequence.

4.3 Exploratory curves

Exploratory curves window

The EXPLORATORY CURVES window shows all curves of the signals

loaded and (if a voltage sweep is running) the live curve.