Instruction Manual

4.2 Exploratory specification window
797 VA Computrace – Software
73
EXPLORATORY SPECIFICATION / File / Export voltammetric
parameters ...
Save the voltammetric parameters of the current
signal loaded in the working memory into an AC-
SII file (extension *.txt). The files can be imported
into spreadsheet programs like Microsoft Excel or
into text programs like Microsoft Word.
Transfer parameters and data
Measurement parameters and/or data points of signal files can be
transferred between the exploratory mode and the determination
mode.
EXPLORATORY SPECIFICATION / Transfer /
P
arameters / To working method
Transfer measurement parameters from the EX-
PLORATORY SPECIFICATION
window to the
WORKING METHOD SPECIFICATIONS window.
EXPLORATORY SPECIFICATION / Transfer /
P
arameters / From working method
Transfer measurement parameters from the
WORKING METHOD SPECIFICATIONS window to
the EXPLORATORY SPECIFICATION window.
EXPLORATORY SPECIFICATION / Transfer /
P
arameters / From determination method
Transfer measurement parameters from the EDIT
DETERMINATION METHOD PARAMETERS
window
to the EXPLORATORY SPECIFICATION window.
EXPLORATORY SPECIFICATION / Transfer / Data to determination
Transfer measurement data of the loaded signal
file to the loaded determination file. The data set
to which the measurement data should be trans-
ferred has to be specified as VR code (number of
variation and replication).
Variation: 0, 1, 2 … (0 = blank, 1 = sample, 2 =
first addition, …)
Replication: 1, 2, 3 …
Performing exploratory measurements
Measurements in the exploratory mode can be performed using the
following icons (in the MAIN WINDOW) or buttons (in the EX-
PLORATORY SPECIFICATION
window):
Start measurement
The operation sequence (see section
3.4) defined
in the EXPLORATORY SPECIFICATION window is
started. Each step of the operation sequence is
listed in the first line of the status window beside
the <Start> button.