Instruction Manual

4 Exploratory mode

797 VA Computrace – Software

4 Exploratory mode

4.1 Exploratory mode overview

Exploratory mode features

The program part "Exploratory" has been especially designed for

practice-oriented qualitative voltammetric analysis. It com-

prises ten different measurement techniques and is curve oriented.

You are shown voltammograms and the associated parameters in

two windows next to each other. The various voltammograms can

be superimposed on one another thus making comparison of the

curves extremely simple.

Peaks or waves of the measured curves can be evaluated automati-

cally or manually after setting the base points. Tracing the curves

with a cursor allows the measured current and voltage values to be

accessed.

Thanks to its possibilities, this program part is helpful in the devel-

opment and optimization of methods for the quantitative determi-

nation of substances. The optimized voltammetric parameters can

be transferred directly to the working method in the program part

"Determination".

Exploratory mode selection

MAIN WINDOW / Mode / Exploratory

Switching to the exploratory mode for recording

and displaying of signals.

Exploratory mode windows

MAIN WINDOW / Window / Exploratory specification (F11)

The EXPLORATORY SPECIFICATION window will

be opened or (if it is already open) closed.

MAIN WINDOW / Window / Exploratory curves (F12)

The EXPLORATORY CURVES window will be

opened or (if it is already open) closed.