Instruction Manual

2.7 Settings menu

797 VA Computrace – Software

Note: The working method parameters cannot be changed

during the GLP validation. Optimization of the method should

be done before the GLP validation.

4. Press <continue> one more time; the PLACE SAMPLE window

opens. Fill the measurement vessel as defined and press <Ok>,

the MONITOR window opens and the measurement starts.

5. The Result part of the Validation of Standard Method page of

the GLP WIZARD window opens.

6. Press <continue> one more time; the Summary of GLP valida-

tion

page of the GLP WIZARD window opens.

7. Press <Finish>.

Note: Metrohm recommends to check all 4 procedures on the GLP

Wizard page of the GLP WIZARD window . The tests are progressed

in the order as listed.

Database settings

MAIN WINDOW / Settings / General Settings

The Database settings can be defined on the Da-

tabase

tab on the GENERAL SETTINGS window.

Note: If you work with the new program version «797 VA

Computrace Software 1.3.x» and try to export to a databa-

se created with an old program version «797 VA Compu-

trace Software 1.X», an error message appears (see Error

message "Please select a new database file"). If you work

with the «797 VA Computrace Software 1.3.x», export only

to databases created with «797 VA Computrace Software

1.3.x».

Manual Transfer Mode

Use default database file when exporting determinations

Determinations are stored directly in the default

database if you export them via

MAIN MENU / File

/ Export To Database

Ask for database file when exporting determinations

If you export determinations via MAIN MENU / File

/ Export To Database

the SELECT DETERMINATION

DATABASE FILE

window opens, and you choose

the database file where the current determination

is stored.

Note: The automatic database export directly after deter-

minations is defined on the sheet Export of the working

method.