Instruction Manual

2 Main window

797 VA Computrace – Software

Dosino Device MSB

4 846 Dosing Interface MSB1

5 846 Dosing Interface MSB2

6 846 Dosing Interface MSB3

7 846 Dosing Interface MSB4

Volume Burette (mL) [read only]

Volume of the exchange unit of the Dosing De-

vice.

Type [read only]

Which Dosing Device is connected (possible:

700/800 Dosino, 685/805 Dosimat).

Dose rate (mL/min) [ 0.01 ... 166 mL/min (depending on

dosing/exchange unit); 2 mL/min ]

Dosing rate of the Dosing Device. The dose rate is

limited by the 3.333 fold volume of the burette

per minute.

Note: If the diameter of Tube out is smaller than

1 mm, the maximum Dose rate is generally limited

to 4 mL/min.

Fill rate (mL/min) [ 0.01 ... 166 mL/min (depending on dos-

ing/exchange unit); 3 * Volume Burette / min ]

Filling rate of Dosing Device.

Tube in

φ (mm)

Diameter of the tube going in the Dosing Device

(Dosino: Port 2).

length (cm)

Length of the tube going in the Dosing Device

(Dosino: Port 2).

Tube out

φ (mm)

Diameter of the tube going out the Dosing Device

(Dosino: Port 1).

length (cm)

Length of the tube going out the Dosing Device

(Dosino: Port 1).

Note: If a tube is removed and replaced by a tube

with a different diameter, change first the pa-

rameter Tube (in/out) φ (mm), and afterwards the

parameter Dose rate (mL/min).

Prep / Empty via port [ 1, 3 ; 1 ]

Choose the port which is used for the functions

"Prep" and "Empty". Recommended is Port 3

(does not lead to the measuring cell but to a