Instruction Manual

5.8 Data processing and evaluation

797 VA Computrace – Software

141

mined by the baseline parameters set for this substance in the

BASELINE window (see Baseline, section 5.2). The following possi-

bilities exist for baseline calculation:

Linear

Front end

Linear

Rear end

Linear

Whole Peak

Start End

Exponential

Whole Peak

Start End

Polynomial

Whole Peak

Start End

Horizontal

Whole Peak

As default, the start and end base points of the baselines are calcu-

lated automatically. They can be set to fixed voltage values if de-

sired. The baseline scope Front end or Rear end for linear baselines

should be selected for asymmetric or double peaks.

Evaluation quantity calculation

The peak evaluation quantity is identical for all peaks of a determi-

nation and must be set on the Substances tab of the EDIT WOR-

KING METHOD PARAMETERS

window (see Working method speci-

fications window, section 5.2). With the aid of the calculated base-

lines, the set evaluation quantity

Height, Area, Derivative or Coulo-

metric

is determined for each substance peak and displayed as a

result.