Instruction Manual

1.3 Installation
797 VA Computrace – Software
3
Data
Folder for storage of new signal (*.sig) and deter-
mination files (*.dth). In Windows Vista, this folder
is stored in ProgramData/Metrohm/797 VA Com-
putrace
.
Demo data
Folder containing signal and determination file ex-
amples. The subfolder CVS contains examples for
the electroplating bath analysis, the subfolder
Practical Voltammetry all examples of the
8.757.5003 Metrohm Monograph "Practi-
cal Voltammetry", which is available from
Metrohm on request. In Windows Vista, this folder
is stored in ProgramData/Metrohm/797 VA Com-
putrace.
Note: The signal and determination file examples are
installed as read-only.
Firmware
Folder for storage of new files (*.exe) for a firm-
ware update.
Hardware
Folder for storage of firmware files (*.x).
Method
Folder for storage of method files (*.mth). You find
some basic examples in the Method folder and
more examples in the subfolders Application Bulle-
tin
, Application Notes and CVS. In Windows Vista,
this folder is stored in ProgramData/Metrohm/797
VA Computrace.
XML
Folder for storage of files which are needed for
viewing XML files in a browser.
6. Connect VA Computrace to the PC using the 6.2151.020
USB cable. The PC detects a new USB device and starts the
setup wizard. Insert installation CD into CD drive and follow the
wizard instructions always selecting the recommended default
options.
7. Start the 797 VA Computrace software.
8. In the login-window click Start measurements without entering
anything for Name and Password.
Installation of Dosing Devices
Up to seven Dosing Devices (possible: 700/800 Dosino, 685/805
Dosimat) can be connected to the MSB ports of the 797 VA Com-
putrace stand or (in case you installed one) the 846 Dosing Inter-
face.
Connection of Dosing Devices:
1. Switch off the 797 VA Computrace stand.