Instruction Manual

5.5 Results
797 VA Computrace – Software
131
Note: With the electroplating bath modes CVS and CPVS, and the
Calibration technique "LAT Record intercept value" Volume Inter-
cept Solution
is indicated instead of Sample amount.
Note: With the electroplating bath modes CVS and CPVS, and the
Calibration techniques "LAT Standard addition for brighteners",
"MLAT Standard addition for brighteners" and "RC Sample with re-
sponse curve" Volume prod. bath is displayed instead of Sample
amount
.
Substance evaluation
Substance
Substance name (see Substance on the Substances tab,
section 5.2).
Conc.
Calculated substance concentration referring to the total
volume of solution (Cell volume) in the measuring vessel at
the start of the first sweep.
Conc.dev.
Absolute and relative total deviation of the calculated sub-
stance concentration Conc..
Amount
Absolute substance amount in the measuring vessel.
Add.amount
Substance amount added in every standard addition (only
available for constant additions).
Note: For CVS and CPVS, additional evaluation values are dis-
played.
Peak evaluation
VR Number of variation and replication.
V
Evaluated peak voltage (V).
A;W;A/V;C {for PSA/CCPSA: s/V;s;s/(V*V)}
Calculated eval. quantity (height, area, derivative or
charge)
i.mean; P.mean; mean; Q.mean(only with modes CVS and
CPVS)
Mean value of the evaluation quantity for all replications of
a variation.
Std.Dev.
Standard deviation of the evaluation quantity for all repli-
cations of a variation.