Instruction Manual

1 Introduction

797 VA Computrace – Software

1.2 General information

Hardware requirements for the PC

Computer Pentium III with 1 GHz or higher

Operating system Windows™ 2000, Windows™ XP Pro-

fessional, Windows™ Vista Profes-

sional

Free space on hard disk 40 MB for program files

Working memory RAM 256 MB

Graphics resolution 1024×768 or more

Interface 1 free USB connection

Printer Any printer supported by operating

system

Note: Set the screen saver to "None" and deactivate any energy

saving features. Additionally, do not use several other programs

together with VA Computrace.

Demo version

If the 797 VA Computrace Software 1.3.x (6.6053.030) is installed

on a PC without installation of VA Computrace stand, this software

can be used as a demo version, which is restricted to the recalcula-

tion of determination or signal files.

Registration

Please send us your 8.797.8027 Registration card as soon as

possible. Only registered users will get updated program versions at

a special price.

1.3 Installation

Installation of the hardware

1. Switch on PC and start operating system (Windows™ 2000,

Windows™ XP Professional, Windows™ Vista Professional)

without connection of the VA Computrace via USB cable.

2. Insert installation CD into CD drive.

3. If the autorun option for the CD drive is disabled, select <Start>

and Run. Browse for the Setup.exe file on the installation CD

and click on

<OK>.

4. Click on "

797" and follow the instructions given in the setup

program.

5. The software package will be installed in the desired directory

(the default directory is Program Files/Metrohm/797 VA Compu-

trace

). In addition to the program files, the following folders

are installed: