Instruction Manual

5 Determination mode
797 VA Computrace – Software
124
EDIT WORKING METHOD WINDOW.
Edit addition parameters
DETERMINATION CURVES / Edit / Addition parameters /
D
raw
Enable/disable the drawing of the curve selected
in list of curves. The entry in the
Draw column of
the list is changed.
DETERMINATION CURVES / Edit / Addition parameters /
D
raw selected
Draw only the curves selected in the list of curves.
The entries in the Draw column of the list are set
to “No" for all other curves.
DETERMINATION CURVES / Edit / Addition parameters /
Draw a
ll
Draw all available curves. The entries in the
Draw
column of the list are set to Yes for all curves.
DETERMINATION CURVES / Edit / Addition parameters / Use
Enable/disable the use of the object selected in the
list of curves for calculation. The entry in the Use
column of the list is changed and the substance
evaluation is recalculated.
DETERMINATION CURVES / Edit / Addition parameters / Use
selected
Use only the objects selected in the list of curves
for calculation. The entries in the Use column of
the list are set to No for all other objects.
DETERMINATION CURVES / Edit / Addition parameters / Use
a
ll
Use all available objects for calculation. The entries
in the Use column of the list are set to Yes for all
objects.
Edit baseline
DETERMINATION CURVES / Edit / Baselines / "Substance
name"
Open the EDIT BASELINE window for modifying
the baseline evaluation for the selected substance
peak. The recalculated peak evaluation height is
displayed in the Substance column of the list of
curves.