Instruction Manual

5.4 Determination curves
797 VA Computrace – Software
123
Electrode [ read only ]
Display of electrode used (details see Electrodes,
section 3.1).
Stirrer [ read only ]
Display of stirrer settings used (details see Stirring,
section 3.4).
Drop size [ read only ]
Display of drop size used (details see Electrodes,
section 3.1).
Potentiostat [ read only ]
Display of potentiostat settings used (details see
Potentiostat, section 3.3).
Determination
The Determination tab of the EDIT DETERMINATION METHOD PA-
RAMETERS
window contains general specifications used for perfor-
ming the determination. For details, see the identical
Determination
tab of the EDIT WORKING METHOD WINDOW, section 5.2. Only
Sample identifier, Sample amount(not with CVS and CPVS mode)
and Cell volume can be edited.
Voltammetric
The Voltammetric tab of the EDIT DETERMINATION METHOD PA-
RAMETERS
window contains the parameters used for preparation
procedures and the VA measurement mode selected. For details,
see the identical Voltammetric tab of the EDIT WORKING METHOD
WINDOW
, section 5.2. All parameters are read only.
Substances
The Substances tab of the EDIT DETERMINATION METHOD PA-
RAMETERS
window contains parameters for the definition and rec-
ognition of substances, for the definition of addition solutions, for
peak evaluation and results calculation. For details, see the identical
Substances tab of the EDIT WORKING METHOD WINDOW, section
5.2.
Calculations
The Calculations tab of the EDIT DETERMINATION METHOD PARA-
METERS
window contains a table with all formulae used for the
calculation of the final results for a substance. For details, see the
identical Calculations tab of the EDIT WORKING METHOD WINDOW,
section 5.2.
Export
The
Export tab of the EDIT DETERMINATION METHOD PARAME-
TERS
window contains settings for the export of determinations to
other file formats. For details, see the identical Export tab of the