Instruction Manual

5.3 Monitor
797 VA Computrace – Software
113
concentrations Conc. refer to this cell volume. It
can be changed for the
Calibration technique
“Standard addition plating bath” if desired.
Add the VMS solution into the measuring vessel
and press <OK>.
PLACE ELECTROLYTE
This window appears in the Electroplating Bath VA
with the Calibration techniques "RC Sample with
response curve" und "RC Record response curve".
The window displays date and time of the deter-
mination start and the title of the method used.
Date and time in the format YYMMDDHHMM
(month-day-hour-minute) and the Sample ID are
used as default for the name of the determination
file to be saved automatically (e.g.
0706181712_sample.dth).
Sample ID [ 32 characters ; "sample" ]
Identification for sample. The expression defined
in the Determination tab is displayed and can be
changed if desired.
Cell volume (mL) [ > 0 mL ; 10 mL ] (with "RC Sample with
response curve” “read only”)
With "RC Record response curve”: Enter the vol-
ume of the added electrolyte solution.
With "RC Sample with response curve”: The Cell
volume
defined on the Determination tab is dis-
played.
Geben Sie die Electrolyte-Lösung ins Messgefäss
und drücken Sie <OK>.
Add the Electrolyte solution into the measuring
vessel and press <
OK>.
ADD BATH SOLUTION
This window appears in the Electroplating Bath VA