Instruction Manual

5 Determination mode

797 VA Computrace – Software

Addition [ Manual, Automatic ; Manual ]

Selection of manual or automatic standard addi-

tion or recording of calibration curves:

Manual

Manual standard addition resp. recording of cali-

bration curves using a pipette.

Automatic

Automatic standard addition resp. recording of

calibration curves using one or several Dosing De-

vices.

Electrode Selection of electrode (see Electrodes, section

3.1).

Drop size Drop size for SMDE or HMDE (see Electrodes, sec-

tion 3.1).

Stirrer Stirrer settings (see Stirring, section 3.4).

Dosing Device settings (see Dosing Devices, sec-

tion 5.2).

Potentiostat settings (see Potentiostat, section

3.3).

Edit working method parameters (see

Determination, Voltammetric, Substances,

Calculations and Documentation).

Determination

The Determination tab of the EDIT WORKING METHOD PARAME-

TERS

window contains general specifications for performing the

determination. The parameters displayed depend on the selected

Calibration technique and measurement Technique.