Instruction Manual

5.2 Working method specifications
797 VA Computrace – Software
89
Calibration [ see below ; Standard addition manual ]
Selection of calibration mode (see also Calibration
techniques with CVS and CPVS, section 6.2):
Standard addition
Standard addition. The number of additions is de-
fined in the Determination tab, the standard ad-
dition solutions are defined in the Substances tab,
and the Dosing Devices are defined in the DOSI-
NOS
window.
Sample with calibration curve
Sample determination using previously recorded
calibration curves. The determination with the re-
corded calibration curves must be defined in the
Determination tab.
Record calibration curve
Recording of calibration curves. The number of
additions is defined in the Determination tab, the
addition solutions are defined in the Substances
tab, and the Dosing Devices are defined in the
DOSINOS window.
Note: For the electroplating bath modes CVS and CPVS
the Calibration techniques are different. See Calibration
techniques with CVS and CPVS, section 6.2).
Technique [ see below ; Batch ]
Selection of measurement technique:
Batch
Measurement without solution exchange.
Batch with solution exchange(not selectable with CVS and
CPVS modes)
Measurement with solution exchange for every
addition or calibration level.
Taken from calibration curve
This option is used automatically if
Sample with
calibration curve
is selected.