User Manual

1.4 Error messages
20 780/781 pH/Ion Meter - Operation via RS232
&Diagnose
Object Description Input range
&Diagnose Diagnose
├ .Init Set default values $G
│ └ .Select Selection of value ACTMODE, MODES, SETUP,
│ CONFIG, ASSEMBLY, ALL
├ .ADCTest Start ADC test $G, $S
├ .LcdTest Start LCD test $G, $S
├ .IoTest Start IO test $G
│ └ .SelIoTest Selection of IO test MSB, REMOTE
├ .BarcodeTest Start barcode test $G
│ └ .SelBarcode Selection of barcode test TESTPLUG, KEYBOARD
├ .RsTest RS232 interface test $G, $S
├ .KeyTest Key test $G
├ .SimulateKey Simulates pressing of key 0...23
├ .Adjust Setting of adjustment data
│ └ .Report Report of Adjustment $G
├ .FlashLoad Start flash load $G, $S
└ .PowerOn Simulation of power on $G