Manual

5.5 Connection of a printer
768 KF-Ofen
51
1 2 3 5 6 7 84
5.5 Connection of a printer
A variety of printers can be connected to the RS232 interface of the Oven. If you connect a
printer other than one of those mentioned below, ensure that the Epson mode is emulated or
that it uses the international character set following the IBM Standard Table 437 and IBM-
compatible graphics control characters.
You may connect the KF Oven together with the Titrator at the same printer using the
2.145.0100 Auto-Switch. Connect the Metrohm instruments with 6.2125.020 cable to the
Auto-Switch and use the printer cable as mentioned in the table below from the Auto-
Switch to the printer.
Printer Cable Settings at the Oven Settings at the printer
Seiko
DPU-414
6.2125.130 baud rate: 9600
data bit: 8
stop bit: 1
parity: none
handshake: HWs
send to: Seiko
none
Citizen
iDP562 RS
6.2125.050 baud rate: 9600
data bit: 8
stop bit: 1
parity: none
handshake: HWs
send to: Citizen
Epson LX-
300
6.2125.050 as above see printer manual
HP Desk
Jet with
serial inter-
face
6.2125.050 baud rate: 9600
data bit: 8
stop bit: 1
parity: none
handshake: HWs
send to: HP
HP Desk
Jet with
parallel in-
terface
6.2125.020
+
2.145.0300
parallel
serial con-
verter
baud rate: 9600
data bit: 8
stop bit: 1
parity: none
handshake: HWs
send to: HP
see printer manual
ON
1 2 3 4 5 6 7 8 9 10
SSW1
1 2 3 4 5 6 7 8
B:
A4 paper
A: