Manual

5.2 Connection of the 756 KF Coulometer or of a Titrino
768 KF-Ofen
48
5.2.1 Installation of the coulometric cell (756 KF Coulometer)
5.2.2 Installation of the titration vessel for Titrinos (volumetry)
The titration vessel is converted for the gas intro-
duction. Instead of the 6.2730.020 Septum Stopper,
the 6.2730.050 Stopper with the 6.1543.060 Tip is
used. (Nipple and O-ring of 6.2730.030 from acces-
sories of the Titrino.)
6.1543.060 Tip
Nipple from 6.2730.030
O-ring from 6.2730.030
6.2730.050 Stopper
Generator electrode
with drying tube
Indicator electrode
Tip 6.1543.060
Screw nipple from
6.2730.030
Stopper 6.1446.060
Equip the cell for gas inlet as follows:
Introduce the tip in the SGJ 14/15 by means of
6.14446.060 stopper. Screw tip into stopper
with nipple and O-ring from 6.2730.030.
If you wish to aspirate the solvent automati-
cally, set up gas inlet into the lateral aperture.
You need the following accessories:
Tip 6.1543.060
Screw cap 6.2701.060
O-ring A.254.0104
A titration vessel with two lateral apertures is
available: ordering number 6.1465.320.