User Manual

1.2 Parts and controls
766 IC Sample Processor
3
11 Splash protection
(6.2751.040)
Must be installed always in
operation!
1515 Contact pressure lever
For adjusting the contact pressure
22 Needle
Steel needle (6.2624.000) or
PEEK needle (6.1835.000)
1616 Holding clamp
For locking the tubing cartridge into
place
33 Lift
With swing head attached
1717 Snap-action lever
For releasing the tubing cartridge
44 Needle holder
(attached)
1818 PEEK capillary (6.1831.060; 1 m)
For conveying the sample to the
injection valve of the 733 IC Separa-
tion Center
55 PEEK compression fitting
(4.766.4070)
For peek capillary 88
1919 Tower
66 PEEK compression fitting
(6.2744.010)
2020 PE bottle (6.1608.080; 300 mL)
77 Swing head
(attached)
2121 Connection cable for swing head
Attached, incl. branch plug for remote
connection
88 PEEK capillary (6.1831.050;
40 cm)
Connection needle – pump
tubing
2222 Remote connection
99 Guide chain
For fixing tubings and cables
2323 Plug cover (6.2752.010)
1010 Pump tubing (6.1826.040)
For conveying the sample
2424 Fuse holder
Changing the fuses, see section 2.2.2
1111 Screw thread for splash
protection
2525 Mains connection plug
Mains connection, see section 2.2.3
1212 Mounting pin
For attaching the tubing
cartridge
2626 Mains switch
For switching the instrument on/off:
I = ON 0 = OFF
1313 Tubing cartridge (6.2755.000)
For 6.1826.0X0 pump tubing
2727 Sample rack (6.2041.430)
1414 Pump drive
Roller head with contact rollers
2828 PP sample tube (6.2743.050)
(can be sealed with 6.2743.060 PE
caps)