User Manual

2 Installation

766 IC Sample Processor

2.3 Attaching the accessories

For attaching the accessories at the 766 IC Sample Processor, pro-

ceed in the order described below.

2.3.1 Connecting the swing head

Plug in the branch plug of the connection cable 2121 permanently at-

tached to the swing head into the remote connection socket at the 766

IC Sample Processor and screw it onto this connection using a screw-

driver (see Fig. 1).

2.3.2 Connecting the keyboard

Connecting the keyboard

Connect the 6.2142.010 keyboard

to the keyboard connection 3131

"Keyboard". For disconnection,

press the plug together slightly on

both sides.

Switch on instrument

Switch on the 766 IC Sample

Processor with mains switch 2626.

The keyboard display lights up.

The instrument is initialized and

the lift is raised completely.

Fig. 4: Keyboard connection

2.3.3 Installing the plug cover

To prevent any contamination of the mains and remote connection by

spilled solvents or chemicals, the 6.2752.010 plug cover must always

be installed when operating the 766 IC Sample Processor !

Install the plug cover 2323 in the corresponding guide groove above

mains connection plug 2525 and remote connection 2222 (see Fig. 1 and

Fig. 2).