User Manual

5.2 RS232 interface
766 IC Sample Processor
101
Object Meaning Entry range/Selection
³
Ã.Outputs Remote outputs
³ À.Status
³
Status of the 14 output lines (Output 0…13; 1 = on,
low, active; 0 = off, high, inactive) in byte form
read only
³
³
³
³
Status
n
n
=
=
∑
2
0
13
Ã.Display Display –
³ Ã.L1 Display in LCD line 1 read only
³ À.L2 Display in LCD line 2 read only
³
À.Counter Sample counter –
Ã.Sample Current sample position read only
À.Maximum Number of samples to be worked off read only
&Setup
&Setup Operating mode
³
Ã.IdReport
³
³
³
³
³
³
³
Send identification before report
Elements of the message:
®
Space (dec 32), ', report identification
¯
" 'co" config
" 'pa" parameters
" 'um" method list
on, off
Ã.Keycode
³
³
³
³
³
³
³
³
³
³
³
³
³
³
³
³
³
³
³
³
Send key code of pressed keys
Elements of the message:
®
Space (dec 32), # or ù, two-place code
¯
Code Key Code Key
0 16 <7 /SAMPLE>
1 <HOLD / LEARN> 17 <4 / PUMP>
2 <STOP> 18 <1 / SCAN>
3 <START> 19 <0>
4 <CONFIG> 20 <END>
5 <PARAM> 21 <è>
6 <USER METHOD> 22 <CLEAR / RESET>
7 23 <ENTER>
8 <9 / LIFT> 24 <
é
>
9 <6 > 25 <
ê
>
10 <3 / WAIT> 26 <SELECT>
11 <* / ENDSEQ> 27 <QUIT>
12 <8 / MOVE> 28 <HOME>
13 <5> 29 <ç>
14 <2 / CTRL> 30 <INSERT>
15 <. / PRINT> 31 <DELETE>
on, off
³
Ã.Tree Definition of the response to $Q
³ Ã.Short
³ ³
³ ³
Path names are sent with just the required number
of characters (boldface characters)
on, off
³ À.ChangedOnly
³
Only path names and their values which have been
edited once are sent.
on, off
³
Ã.Trace
³
³
³
Send path and value on changes
Element of the change message:
®
Space (dec 32), path, ”value”
¯
on, off
³
Ã.Lock Lock functions
³ Ã.Keyboard Lock all keys on, off
³ Ã.Config Locking of <CONFIG> key on, off
³ Ã.Parameter Locking of <PARAM> key on, off