Owner's manual

4.1 Technical data
762 IC Interface 29
4 Appendix
4.1 Technical data
Mains connection
Voltage 100...240 V
Frequency 50...60 Hz
Power consumption 7 VA
Fuse 2 × 1 ATH (to be replaced by Metrohm Service
only using the same type)
Additional electronic overload protection
PC interface (RS232)
Connector Dsub connector 9 pin (male)
1 5
96
Baud rate 1'200…115'200
Data bits 8
Stop bits 1
Handshake Xon/Xoff, none
Parity none, even, odd
FIFO 0…16 Bytes
Pin assignment
Pin 1,4,6: internally connected
Pin 2: RxD (Received Data)
Pin 3: TxD (Transmitted Data)
Pin 5: GND (Signal Ground)
Pin 7,8: internally connected
RS232 interfaces
Connector Dsub connector 9 pin (male)
1 5
96
Baud rate 1'200…115'200 (for Dev. 8 1'200…19'200)
Data bits 7, 8
Stop bits 1, 2
Handshake Xon/Xoff, none
Parity none, even, odd