Manual

4 «IC Cap»
761 SD Compact IC / Instructions for Use 8.761.1043
66
4.2 «IC Cap» - Configuration
Clicking with the right mouse button (anywhere on the «IC Cap»-
interface) and selecting menu item
Configuration opens the CONFIGU-
RATION
window. This is where you make the settings for measure-
ments using «IC Cap».
4.2.1 Predefined configurations
Two predefined configurations are supplied for operating the 761
SD Compact IC:
manual.cfg for manual operation
auto.cfg for automatic operation of the 766 IC Sample Processor
Loading a configuration
During installation, you can select which configuration (
manual.cfg or
auto.cfg) is opened the first time the program is launched (see Section
2.12.2).
The two predefined configurations are saved in folder SD Analyzer\Ic
Net\Iccap
. Clicking on the <Read Configuration> button in the Mis-
cellaneous tab in the
CONFIGURATION window opens this folder (Ic-
cap) and you can load a predefined configuration.
The configuration settings set the last time the program was closed are
loaded when you launch the «IC Cap» software.
For a detailed description of the configuration settings, see Administra-
tor Manual «IC Cap 2.0» Section 2.
4.2.2 Configuration "manual.cfg"
You should load configuration manual.cfg for manual control of the 761
SD Compact IC using «IC Cap». If you answered the prompt "Do you
work with 766 IC Sample Processor?” (see Section 2.12.2) with <No>
during the installation process, configuration
manual.cfg is loaded auto-
matically. Otherwise, you must load it subsequently (see Section 4.2.1).