Manual

4 «IC Cap»

761 SD Compact IC / Instructions for Use 8.761.1043

4 «IC Cap»

The 761 SD Compact IC can be operated via «IC Net» (see Section 3)

or «IC Cap». System and method settings can be modified only with «IC

Net». Using «IC Cap» is recommended for day-to-day operation. «IC

Cap» is an interface with a simplified GUI via which it is possible to con-

trol the «IC Net» software.

This Section discusses the most important aspects of operation of the

761 SD Compact IC using the «IC Cap» program. For further details,

please refer to the supplied Administrator Manual «IC Cap 2.0»

(8.110.8313) and the Online Help in the «IC Cap» program.

4.1 «IC Cap» introduction

Operation of program «IC Cap» is described in detailed in the supplied

Administrator Manual «IC Cap 2.0» (8.110.8313). Only fundamental as-

pects for working with «IC Cap» are described below.

4.1.1 Login

You must have logged in with a User name and Password which are also

listed as users in the installed «IC Net». «IC Net» is reopened with each

measurement started by «IC Cap». Login to «IC Net» is automatic in this

case with the same

User name and Password used by the user for log-

ging in to «IC Cap». This is why the user data for «IC Cap» should corre-

spond to that of «IC Net».

Installation: The first login after installation is made without

User or

Password. The Administrator should then be defined on the General

tab of the

CONFIGURATION window the first time the program is

launched (see Section 2.12.4).

4.1.2 User interface

The main window consists of two parts, the button bar at the right and a

frame in the left-hand side of the window. The particular elements in-

cluded in the

button bar and what elements are displayed in the frame

depends on whether mode

Manual or Queue is activated in the configu-

ration of «IC Cap» (see Section 4.2).

Button bar: Determinations can be started/stopped with the buttons. In

addition, the buttons can be used to set what is displayed in the

frame

(sample parameters, chromatogram or results). For detailed informa-

tion, see Administrator Manual «IC Cap 2.0» Section 2.