Manual

3.1 «IC Net» – User interface for the 761 SD Compact IC
761 SD Compact IC / Instructions for Use 8.761.1043
49
Remote 0, 1, *, p
Set remote output lines 1...8 to the
desired values. For entry of the first
value, enter
1, 0, p or *. For entry of the
other values, move the cursor in front of
the value to be changed and enter
1, 0,
p or *.
Program END, RESET
The
END flag can be used to end a
program, especially if the program time
should be longer than the chroma-
togram duration. Additional steps after
this flag are not allowed. The
RESET
flag is used to reset the parameters to
the system startup values.
Suppressor
Switch suppressor module to the
next position. switch to next position.
Peristaltic on, off
Switch on or off the peristaltic pump.
Configuration
Page
Configuration in the window for the system settings contains con-
figuration settings for the 761 SD Compact IC.
761 unit version Selection of the instrument version:
761.0020 must be set at this point.
Suppressor Suppressor module:
Autostep with Automatic advancing to the next position when
switching over the injection valve to the
Fill or
Inject position.
Use peristaltic pump If this option is deactivated, the peristaltic pump
is not started on Startup hardware or when start-
ing a determination process.