Manual

2.12 Connection to the PC
761 SD Compact IC / Instructions for Use 8.761.1043
33
2.12.4 Basic settings «IC Cap»
Logging in
The first time you start the «IC Cap» software, you must log in without
User or Password. The particular configuration loaded the first time you
open the program depends on whether you work with or without 766 IC
Sample Processor (you must make this selection during the installation
process, see Section 2.12.2).
Without 766 IC Sample Processor:
manual.cfg (see Section 4.2.2)
With 766 IC Sample Processor: auto.cfg (see Section 4.2.3)
The first time you log in, you should define the Administrator and other
users.
Defining Administrator/Users
In order to do this, open the
CONFIGURATION window with the right
mouse button (see Section 4.2). Then, in the General tab of the
CON-
FIGURATION
window, define the Administrator by entering User with
Level (level: Administrator) and Password. For the Administrator, enter
the same
user with the same password which you already defined in «IC
Net».
Then define the other users. For the users, enter the same
user with the
same
password which you already defined in «IC Net». See the Adminis-
trator Manual «IC Cap 2.0», Section 3.2 for creating users.
The users are a part of the configuration and are saved together with
it.
Save configuration
Select the Miscellaneous tab in the
CONFIGURATION window and
click on the <Store Configuration> button. Save the configuration
under a separate name.
Close the software again (see Administrator Manual «IC Cap 2.0» Sec-
tion 3.2).