Owner manual

2 Installation

761 Compact IC

• Select the Connect to workplace menu item of the Control menu

in this window.

• If the connection between PC and Compact IC is working the

message

Hardware settings file for 761 unit with serial number

'#####' not found! Create?

will appear. Click <Yes> in order to

create the configuration file

#####.761 for this instrument.

• If the connection between PC and Compact IC does not work

then the message

Detection of hardware failed[761 Compact IC

[ COM# ]]

appears in the SYSTEM STATE window. In this case

check whether the instrument has been switched on, whether

the connection cable is connected up properly and whether

the COM interface has been set correctly (see point 2). Then

repeat point 3.

4 Hardware settings

Of the general hardware settings only the input of the cell constant

is described. Standard settings can normally be used for all other

parameters.

• Click the 761 icon using the right mouse button and select

the

Hardware item. The Hardware settings window is opened:

• In the

Cell constant field enter the cell constant which is printed

on the 1.732.0110 Detector block (see section 2.3.1).

• Click on

<OK> to close the window and save the settings.