Owner manual

1.2 Parts and controls
761 Compact IC
9
1 Door to interior 39 Purge valve
4
Aspirating tubing
for aspirating the sample;
6.1803.020 PTFE tubing,
length L = 52 cm
40 Aspirating capillary
Connection for 6.1834.010 aspirating
tubing
26 Inlet capillary for injector
6.1831.010 PEEK capillary,
length L = 24 cm
41 Fastening screws
for pump head 42
27 Mounting rail
for 6.2027.0X0 column holder
42 Pump head (6.2824.100)
28 Column connection capillary
6.1831.010 PEEK capillary,
length L = 30 cm
43 Connection capillary
Connection pump head – purge
valve, fixed mounting
29 Sample loop 20 µL
6.1825.210 PEEK sample loop
44 Connection capillary
in pump head, fixed mounting
30 Connection capillary to syringe
6.1803.020 PTFE tubing,
length L = 30 cm
45 Inlet capillary for detector block
PEEK capillary, fixed mounting
31 Rotary nipple for aspirating tube
for fixing the aspirating tube
46 Detector block (1.732.0110)
32 Injection valve 47 Suppressor module
(inlet and outlet capillaries are not
shown)
33 PEEK coupling (6.2744.040) 48 Tubing cartridge (6.2755.000)
for 6.1826.060 pump tubing
34 Leak detector 49 Contact pressure lever
for adjusting the contact pressure
35 Connection capillary
6.1831.010 PEEK capillary,
length L = 13 cm
50 Holding clamp
for locking the tubing cartridge into
place
36 Filter unit PEEK (6.2821.120) 51 Snap-action lever
for releasing the tubing cartridge
37 Connection capillary
6.1831.010 PEEK capillary,
length L = 13 cm
52 Pump drive
roller head with contact rollers
38 Connection capillary
6.1831.030 PEEK capillary,
length L = 20 cm
53 Mounting pin
for attaching the tubing cartridges