Owner manual

4 Operation
761 Compact IC
134
Peak table
The following parameters can be selected for peak table output with de-
termination results:
Quantification method Selection of the method to calculate concentra-
tions of components:
Response normalization
The method normalizes the sum of responses
for all peaks of the chromatogram to the
NORM factor entered in the
Total % for normali-
zation
field:
R
i
% = NORM • R
i
/ Σ R
i
.
All peaks are calculated and reported no matter
whether they have been recognized or not.
The peak table includes the following columns:
Peak number, Retention time, Area + Area% or
Height + Height%
, Name
Normalized concentration
The method normalizes the sum of absolute
concentrations for all peaks of the chroma-
togram to the NORM factor entered in the
Total
% for normalization
field:
C
i
% = NORM • W
i
(R
i
) / Σ W
i
(R
i
)
As long as no universal component is defined,
only peaks with non-zero concentrations are
listed.
The peak table includes the following columns:
Peak number, Retention time, Height, Area,
Response factor, Concentration%, Name
Absolute concentration
This quantification method reports raw quantity
(absolute concentration) of the component
which is calculated directly from the calibration
formula:
Q
i
= W
i
(R
i
) / V'
As long as no universal component is defined,
only peaks with non-zero concentrations are
listed.
The peak table includes the following columns:
Peak number, Retention time, Height, Area,
Response factor, Concentration, Concentration%,
Name
Relative concentration
This quantification method uses the internal
standard method to calculate the relative con-
centrations of the components. For this proce-
dure, a
Standard component must be selected