Manual

3.2 Key Functions

760 Sample Changer, Introduction

3.2 Key Functions

The 760 Sample Changer operates in two different modes where

the keys provide different functions:

The Basic Mode starts when the instrument is turned on. The

ready-to-operate status is indicated by the green LED.

Basic Mode:

(after Power on, green LED on)

START

Starts processing of a sample series.

STOP

RESET

Stops processing of a sample series or initializes the

760 Sample Changer.

HOLD

Interrupts processing of a sample series, green LED

blinks.

START

Continues processing of a sample series.

The Configuration Procedure starts when the instrument is

switched on with pressing <HOLD> simultaneously. The green

LED blinks once. Now, the method can be selected and working,

rinsing and shift heights as well as the stirrer speed can be de-

fined.

Configuration Procedure:

(after Power on with <HOLD> pressed, green LED blinks once)

START

Accepts the setting of a value and moves on to the

next value.

HOLD

Learning mode, manual execution of a changer func-

tion for setting a configuration.

STOP

RESET

Cancels a configuration setting and initializes the 760

when <STOP> is pressed twice. Switches back to

basic condition.