User Manual

4.2 Remote control commands
756/831 KF Coulometer, Instructions for Use
68
&Info
Object Description Input range Reference
& Root
:
Info Current data
: .Report Transmission of formatted reports $G 4.2.2.63.
.Select Report type result, water crv,rate crv,
meas crv, comb, mplist,
param, calc, C-fmla, def,
statistics, smpl data, silo,
scalc full, scalc srt, config,
user method, all, ff ditto
.Checksums Checksums $G 4.2.2.64.
.ActualMethod Checksum of current method read only ditto
.DetermData Determination data $G 4.2.2.65.
.Write Read/write for several nods ON, OFF
.TitrResults Titration results
.RS Calculated results
.1 1
st
result
.Value Value read only 4.2.2.66.
up to 9 results
.EP Endpoint
.V Value read only ditto
.Meas Measured value read only
.Var Variables C4X
.C40 Start measured value read only/read+write ditto
.C41 Mass of water read only/read+write
.C42 Titration time read only/read+write
.C43 Drift at titration start read only/read+write
.C44 Titration temperature read only/read+write
.C45 Total charge (mA·s) read only/read+write
.StatisticsVal Statistics values
.ActN Number of results in chart read only 4.2.2.67.
.1 1
st
mean
.Mean Mean read only ditto
.Std Absolute standard deviation read only ditto
.RelStd Relative standard deviation read only ditto
up to 9 mean values
.SiloCalc Values of silo calculations
.C24 Values of variable C24
.Name Name read only 4.2.2.68.
.Value Value read only ditto
.Unit Unit read only ditto
.C25 as for C24
.C26 Values of variable C26
.ActN Number of single values read only ditto
.Mean Mean value read only ditto
.Std Absolute standard deviation read only ditto