User Manual

4.2 Maintenance and servicing

753 Suppressor Module / 8.753.1003 Instructions for Use

3838373736363535

Fig. 9: Assembling the suppressor

3535 Screw nut 3737 Suppressor rotor (6.2832.000)

3636 Connection piece

(6.2832.010)

with input and output leads

3838 Suppressor holder

Clean connection piece

• Clean the sealing surface of connection piece 3636 with the aid

of a lint-free cloth and ethanol.

Insert connection piece

• Insert connection piece 3636 in suppressor holder 3838 in such a

way that connection "1" is at the top and that the three lugs on

the connection piece fit in the corresponding openings of the

holder.

• Screw nut 3535 onto the thread of suppressor holder 3838 manu-

ally (do not use tools).

Connect and condition the suppressor

• Reconnect the suppressor to the IC system (see section 2.3.2

and section 2.4.2).

• Before switching the suppressor to the next position for the

first time rinse all 3 suppressor units with solution for 5 min.