User Manual

2.10. Data output
751 GPD Titrino
82
Additional possibilities for report outputs
In addition to the reports which are printed at the end of the titration, various other reports
can be put out. There are 2 possibilities to select the reports:
1) <PRINT><←/→><ENTER> Cursor is pressed repeatedly until the desired report
appears in the display.
2) <PRINT><keyX><ENTER> key X is the key under which the appropriate data
are entered.
List of the "keys X":
Report <Key X>
Configuration report CONFIG
Parameter report PARAM
Current sample data SMPL DATA
Statistics report with the individual results STATISTICS
All sample data from the silo memory SILO
Preparation of titration burets PREP
Calibration data CAL.DATA
Content of the current card directory CARD
Operands C01...C19 C-FMLA
Contents of the <DEF> key DEF
Contents of the method memory with details of the memory
requirements of the individual methods and the remaining bytes
USER METH
Complete report sequence of the last determination, as defined
under the <DEF> key in the method
REPORTS
Result display without printer
If you work without printer, we recommend to work with the standard character set for
result display (settings in key <CONFIG>, ">auxiliaries", see page 10). You will get the
complete information on your determinations: Calculated results, endpoints, messages
etc.