User Manual

6.1 Technical specifications
751 GPD Titrino
219
Display Graphical LCD, 192 x 64 Dots
Field: 100 x 37 mm
LED back-lit
Memory card
Standard JEIDA ICMC 4.0 / PCMCIA (68 pins)
Data Method memory
Storage capacity 128 KB (256 KB maximum)
SRAM card Write and read, battery supplied
Flash Read only with 60 Metrohm methods
Internal memory Method memory for up to 100 methods
Silo memory for sample data and results
RS232 interface 2 separate interfaces, each can be configured
for printer, balance or computer connection: completely
controllable from external control unit
Remote input/output lines for Sample Changer, robot connection.
With optional Remote Box:
Connection of barcode reader and PC keyboard.
Stirrer control Switch the stirrer on/off either manually or coordinated with
the titration sequence
Ambient temperature
Nom. operation range 5 ... 40 °C
Storage – 20 ... 60 °C
Transport – 40 ... 60 °C
Safety specifications Designed and tested in accordance to IEC publication
1010, safety class I. This manual contains information and
warnings which have to be followed by the user to ensure
safe operation and to retain the apparatus in safe condition.
Mains connection
Voltage 100...240 V
Frequency 50 ... 60 Hz
Power consumption 15 W
Fuse 2 x 1 ATH (to be replaced by Metrohm Service only using
the same type)
Additional electronic overload protection