User Manual

3.2 Remote control commands
751 GPD Titrino
175
Selects the Titrino COM for the output of automatic info:
&Setup.Keycode
&Setup.Trace
&Setup.SendMeas
&Setup.AutoInfo
3.2.2.3.2.2.160.160. SeSetup.K.Keycode ON, OFF OFF
ON means the key code of a key pressed on the Titrino is outputted. The key
code comprises 2 ASCII characters; table of the keys with their code, see page
195. A keystroke of key 11 is sent as follows:
#11
The beginning of the message is marked by a space (ASCII 32).
3.2.2.3.2.2.161.161. SeSetup.TTree.SShort ON, OFF OFF
SeSetup.TTree.CChangedOnly ON, OFF OFF
Definition of the type of answer to $Q.
.Short: With "ON", each path is sent with only the necessary amount of
characters in order to be unequivocal (printed in bold in this manual). A combi-
nation of .Short and .ChangedOnly is not possible.
.ChangedOnly: Sends only the changed values, i.e. values which have been
edited. All paths are sent absolute, i.e. from the root.
3.2.2.3.2.2.162.162. SeSetup.Tra.Trace ON, OFF OFF
The Titrino automatically reports when a value has been confirmed with
<enter> at the Titrino. Message, e.g.:
&SmplData.OFFSilo.Id1"Trace"
The beginning of the message is marked by a space (ASCII 32).
3.2.2.3.2.2.163.163. SSetup.L.Lock.K.Keyboard ON, OFF OFF
SeSetup.L.Lock.C.Config ON, OFF OFF
SeSetup.L.Lock.P.Parameter ON, OFF OFF
SeSetup.L.Lock.S.SmplData ON, OFF OFF
SeSetup.L.Lock.U.UserMeth.R.Recall ON, OFF OFF
SeSetup.L.Lock.U.UserMeth.S.Store ON, OFF OFF
SeSetup.L.Lock.U.UserMeth.D.Delete ON, OFF OFF
SeSetup.L.Lock.D.Display ON, OFF OFF
ON means disable the corresponding function:
.Keyboard: Disable all keys of the Titrinos
.Config: Disable the <configuration> key
.Parameter:Disable the <parameter> key
.SmplData: Disable the <smpl data> key
.UserMeth.Recall: Disable "recall" in <user meth> key
.UserMeth.Store: Disable "store" in <user meth> key
.UserMeth.Delete: Disable "delete" in <user meth> key
.Display: Disable the display, i.e. it will not be written to by the device pro-
gram of the Titrino and can be operated from the computer.