User Manual

3.2. Remote control commands
751 GPD Titrino
164
3.2.2.3.2.2.115.115. CConfig.DDosPrep.DXDX(.D.Dosimat).RRepeat 1...22...9
Number of cycles for expelling the volume at the preparation. Start of sequence
see 3.2.2.152.
3.2.2.3.2.2.116.116. CConfig.DDosPrep.DXDX(.D.Dosimat).DDosRate 0.01...150, max.max.
CConfig.DDosPrep.DXDX(.D.Dosimat)..FFillRate 0.01...150, max.max.
Dosing and filling rate in ml/in for the preparation. Start of sequence see
3.2.2.152.
3.2.2.3.2.2.117.117. CConfig.DDosPrep.DX.SDX.Select DosimatDosimat, Dosino
Selection of buret type. Start of sequence see 3.2.2.152.
3.2.2.3.2.2.118.118. CConfig.DDosPrep.DX.DosinDX.Dosino.OOutlet tiptip, flask
Place where the liquid of the preparation is expelled. Start of sequence see
3.2.2.152.
tip: To the tip.
flask: Back to the flask.
3.2.2.3.2.2.119.119. CConfig.DDosPrep.DX.DosinDX.Dosino.DDosTubing.LLength 1...4040...999.9
CConfig.DDosPrep.DX.DosinDX.Dosino.DDosTubing.DDiameter 0.1...22...9.9
CConfig.DDosPrep.DX.DosinDX.Dosino.AAspirTubing.LLength 1...2525...999.9
CConfig.DDosPrep.DX.DosinDX.Dosino.AAspirTubing.DDiameter 0.1...22...9.9
.DosTubing: Dosing tube. Length in cm, diameter in mm.
.AspirTubing: Aspiration tube. Length in cm, diameter in mm.
Start of sequence see 3.2.2.152.
3.2.2.3.2.2.120.120. CConfig.DDosPrep.DX.DosinDX.Dosino.DDosRate 0.01...150, max.max.
CConfig.DDosPrep.DX.DosinDX.Dosino.FFillRate 0.01...150, max.max.
Dosing and filling rate in ml/min for preparation. Start of sequence see
3.2.2.152.
3.2.2.3.2.2.121.121. SSmplData.S.Status ON, OFF OFF
On/off switching of silo memory. When the silo memory is switched on, the
sample data are fetched from the lowest valid silo line.
3.2.2.3.2.2.122.122. SSmplData.O.OFFSilo.I.Id1 up to 8 ASCII characters
SSmplData.O.OFFSilo.Id2.Id2 up to 8 ASCII characters
SSmplData.O.OFFSilo.Id3.Id3 up to 8 ASCII characters
SSmplData.O.OFFSilo.V.ValSmpl 6-digits, sign and decimal point
SSmplData.O.OFFSilo.U.UnitSmpl up to 5 ASCII characters
Current sample data.