User Manual

3.2. Remote control commands
751 GPD Titrino
160
3.2.2.3.2.2.85.85. MeMemoryCard.RelReload $G
MeMemoryCard.RelReload.NName up to 10 ASCII characters
Reload a backup from the memory card into the internal memory. The action is
carried out if "$G" is transmitted to the corresponding node.
Do not use blank characters before and after name!
3.2.2.3.2.2.86.86. MeMemoryCard.FFormat $G
MeMemoryCard.CCardLabel.NName up to 8 ASCII characters
Format the memory card. The action is carried out if "$G" is transmitted to the
corresponding node.
Do not use blank characters before and after name!
3.2.2.3.2.2.87.87. MeMemoryCard.FrFreeMem read only
Free memory on the card. $Q sends number of free bytes, e.g. "4928".
3.2.2.3.2.2.88.88. MeMemoryCard.BatBatteryChange $G
MeMemoryCard.BatBatteryChange.DDate YYYY-MM-DD
Date for changing battery. The date will be set with "$G".
3.2.2.3.2.2.89.89. MeMemoryCard.LList.C.Card.1.N.1.Name read only
MeMemoryCard.LList.C.Card.1.B.1.Bytes read only
for each directory
List of all directories on the memory card with the following information:
.Name: Name of the directory
.Bytes: Number of bytes used by the directory
3.2.2.3.2.2.90.90. MeMemoryCard.L.List.AActDir.1.NName read only
MeMemoryCard.LList.AActDir.1.MMode read only
MMeemoryCard.LList.AActDir.1.QQuantity read only
MeMemoryCard.LList.AActDir.1.DDosUnit read only
MeMemoryCard.LList.AActDir.1.BBytes read only
MeMemoryCard.LList.AActDir.1.CChecksum read only
for each method
List of all methods of the current card directory with the following information:
.Name: Name of the method
.Mode: Mode
.Quantity: Measured quantity
.DosUnit: Buret of the method
.Bytes: Number of bytes used by the method
.Checksum: Checksum of the method, see 3.2.2.133.
3.2.2.3.2.2.91.91. CConfig.M.Monitoring.V.Validation.S.Status ON, OFFOFF
CConfig.M.Monitoring.V.Validation.I.Interval 1...365365...9999
CConfig.M.Monitoring.V.Validation.C.Counter 00...9999
CConfig.M.Monitoring.V.Validation.Cl.ClearCount $G