User Manual
3.2 Remote control commands
751 GPD Titrino
143
3.2.2 Description of the remote control commands
3.2.2.3.2.2.1.1. MMode $G, $S, $H, $C
Start and stop ($G, $S) or hold of the current method (3.2.2.3) with $H and
continue with $C.
$G also serves to continue after inquiries of identifications and sample size af-
ter the start (see 3.2.2.26) as well as after inquiries of calibration temperature
and pH values of buffers (see 3.2.2.68 and 3.2.2.69).
3.2.2.3.2.2.2.2. MMode.Q.QuickMeas $G, $S
Start and stop of a measurement in the basic mode with the parameters
(measured quantity, measuring input) of the current method. Corresponds to
the <meas/hold> key. In TIP and DOS, the measured quantity is selected with
&Mode.Parameter, see 3.2.2.76 and 3.2.2.56.
With an ongoing measurement, the current mode can be started. This stops the
measurement automatically.
3.2.2.3.2.2.3.3. MMode.S.Select DETDET, MET, SET, KFT, STAT, DOS,
DOC, MEAS, CAL, TIP
MMode.D.DETQuantity pHpH, U, Ipol, Upol
MMode.M.METQuantity pHpH, U, Ipol, Upol
MMode.SET.SETQuantity pHpH, U, Ipol, Upol
MMode.MEA.MEASQuantity pHpH, U, Ipol, Upol, T
MMode.K.KFTQuantity IpolIpol, Upol
MMode.ST.STATQuantity pHpH, U, Ipol, Upol
MMode.DO.DOCQuantity pHpH, U, Ipol, Upol
Selection of the standard mode. Mode and the measured quantity belong to the
complete selection.
If a method is selected from the method memory, the nodes &Mode.Select and
&Mode.XXXQuantity are overwritten with mode and measured quantity of the
corresponding user method.
3.2.2.3.2.2.4.4. MMode.N.Name read only
Name of the current method in the working memory. $Q sends 8 ASCII char-
acters. Standard methods carry the name ********. The node can be set read
+ write, see 3.2.2.134.
3.2.2.3.2.2.5.5. MMode.Def.F.Def.Formulas.1.F.1.Formula EPX, CXX, RSX, +, -, *, /, (, )
MMode.Def.F.Def.Formulas.1.T.1.TextRS up to 8 ASCII characters
MMode.Def.F.Def.Formulas.1.D.1.Decimal 0...22...5
MMode.Def.F.Def.Formulas.1.U.1.Unit up to 6 ASCII characters
MMode.D.Def.F.Formulas.1.L.1.Limits ON, OFFOFF
MMode.D.Def.F.Formulas.1.Lo.1.LoLim 00...±999 999
MMode.D.Def.F.Formulas.1.Up.1.UpLim 00...±999 999
MMode.D.Def.F.Formulas.1.O.1.Output active, pulse, OFFOFF
MMode.D.Def.F.Formulas.2.F.2.Formula
etc. up to .9.9