User Manual

3.2. Remote control commands
751 GPD Titrino
136
&Info
Object Description Input range Reference
& Root
:
à Info Current data
: Ã .ReportTransmission of formatted reports $G 3.2.2.130.
³ Ã .Select Report type configuration, parameters,
³ smpl data, statistics, silo, calib
³ C-fmla, def, user method, full,
³ short, mplist, curve, derive, comb,
³ meas crv, temp crv, adj para,
³ scalc full, scalc srt, prep, calc,
³ act dir, mem card, all, ff ditto
³
à .CalibrationData pH calibration data $G 3.2.2.131.
³ Ã .Inp1 For measuring input 1
³ ³ Ã .pHas Asymmetry pH 0...7.00...±20.00 ditto
³ ³ Ã .Slope Slope of electrode 0...1.000...±9.999 ditto
³ ³ Ã .Temp Calibration temperature -170.0...25.0...500.0 ditto
³ ³ Ã .Date Date of calibration read only ditto
³ ³ Ã .ElectrodeId Id of the calibrated electrode read only ditto
³ Ã .Inp2 For measuring input 2, as for input 1
³ Ã .Diff For differential input, as for input 1
³
à .PrepData Preparation data
³ Ã .D0 For the internal Titrino buret
³ ³ Ã .Date Preparation date read only 3.2.2.132.
³ ³ Ã .Time Preparation time read only ditto
³ Ã .D1 For buret D1
³ ³ Ã .Type Buret type read only ditto
³ ³ Ã .Date Preparation date read only ditto
³ ³ Ã .Time Preparation time read only ditto
³ Ã .D2 For buret D2, as for D1
³
à .Checksums Checksums $G 3.2.2.133.
³ Ã .MPList Checksum of meas.point list read only ditto
³ Ã .ActualMethod Checksum of current method read only ditto
³
à .DetermData Determination data $G 3.2.2.134.
³ Ã .Write Read/write for several nods ON, OFF
³ Ã .ExV Volume of Exchange/Dosing unit read only/read+write ditto
³ Ã .MPList Measuring point list
³ ³ Ã .1 Measuring point 1
³ ³ ³ Ã .Attribute Attribute read only/read+write ditto
³ ³ ³ Ã .X X coordinate read only/read+write ditto
³ ³ ³ Ã .Y Y coordinate read only/read+write ditto
³ ³ ³ Ã .Z1 Z1 coordinate read only/read+write ditto
³ ³ ³ Ã .Z2 Z2 coordinate read only/read+write ditto
³ ³ ³ for each measuring point
³
à .TitrResults Titration results
³ Ã .RS Calculated results
³ ³ Ã .1 1
st
result
³ ³ ³ Ã .Value Value read only 3.2.2.135.
³ ³ Ã up to 9 results