User Manual

3.2 Remote control commands
751 GPD Titrino
133
à .RSSet1 Settings RS232, 1 $G 3.2.2.108.
³ Ã .Baud Baud rate 300,600,1200,2400,4800,
³ ³ 9600,19200,38400,57600,
³ ³ 115200 ditto
³ Ã .DataBit Number of data bits 7, 8 ditto
³ Ã .StopBit Number of stop bits 1, 2 ditto
³ Ã .Parity Parity even, odd, none ditto
³ Ã .Handsh Handshake HWs, SWchar,
³ ³ SWline, none ditto
à .RSSet2 as for RS1
³
à .ComVar Values of common variables
³ Ã .C30 C30 0... ±999 999 3.2.2.109.
³ Ã up to C39 0... ±999 999
³
à .DosPrep Parameters for the preparation of burets
³ Ã .PowerOnPrep Warning after power on ON, OFF 3.2.2.110.
³ Ã .Report Preparation report ON, OFF 3.2.2.111.
³ Ã .Select Selection of dosing unit internal D0, external D1,
³ external D2 3.2.2.112.
³ Ã .D0 Internal Titrino buret
³ ³ Ã .WarnInterval Warning interval for preparation 5...9999, OFF 3.2.2.113.
³ ³ Ã .V Volume 0...3.5...99999.99 3.2.2.114.
³ ³ Ã .Repeat Number of cycles 1...2...9 3.2.2.115.
³ ³ Ã .DosRate Dosing rate 0.01...150, max. 3.2.2.116.
³ ³ Ã .FillRate Filling rate 0.01...150, max. ditto
³ Ã .D1 Buret D1
³ ³ Ã .WarnInterval Warning interval for preparation 5...9999, OFF 3.2.2.104.
³ ³ Ã .Select Type of dosing unit Dosimat, Dosino 3.2.2.117.
³ ³ Ã .Dosimat Parameters for Dosimats
³ ³ ³ Ã .V Volume 0...3.5...99999.99 3.2.2.107.
³ ³ ³ Ã .Repeat Number of cycles 1...2...9 3.2.2.108.
³ ³ ³ Ã .DosRate Dosing rate 0.01...150, max. 3.2.2.109.
³ ³ ³ Ã .FillRate Filling rate 0.01...150, max. ditto
³ ³ Ã .Dosino Parameters for Dosinos
³ ³ ³ Ã .Outlet Expelling outlet tip, flask 3.2.2.118.
³ ³ ³ Ã .DosTubing Size of dosing tubes
³ ³ ³ ³ Ã .Length Length 1...40.0...999.9 3.2.2.119.
³ ³ ³ ³ Ã .Diam Diameter 0.1...2.0...9.9 ditto
³ ³ ³ Ã .AspirTubing Size of aspirating tubes
³ ³ ³ ³ Ã .Length Length 1...25.0...999.9 ditto
³ ³ ³ ³ Ã .Diam Diameter 0.1...2.0...9.9 ditto
³ ³ ³ Ã .DosRate Dosing rate 0.01...150, max. 3.2.2.120.
³ ³ ³ Ã .FillRate Filling rate 0.01...150, max. ditto
³ Ã .D2 Buret D2 as for D1